Horizontal Multistage Ring Sectional Centrifugal Process Pump D280-43X3 for Mining Sewage Water
Description
A centrifugal pump works by creating a centrifugal force to move liquid through the pump, increasing the liquid’s pressure as it moves from suction through the discharge end. A multi-stage centrifugal pump contains two or more impellers in the same pump unit. Ring section pumps, which are a type of multistage centrifugal pump, have multiple stages arranged in tandem inside their casings. As the liquid passes through each stage, the pressure of the liquid increases. This is especially useful for certain applications, including boiler feed systems, municipal fire suppression (think high-rise building sprinklers, for example), amine sour natural gas treatment systems, and so many others.
The D series Multistage Ring Section Centrifugal Process Pump is a configured, ring section, multistage pump specifically designed for high pressure feed service in long distance water tranferring applications. A Centrifugal Process pump is one whose function is part of the process. The pump doing this type of job will be directly responsible for maintaining the continuous operation of the process.
Balancing system
The balancing system consists of the balancing bushing, installed in the discharge casing, and the balancing drum, assembled on the shaft. The system uses the force of the liquid being pumped to reduce load on mechanical seal and wear on the bearings. The complete system can be disassembled for maintenance without removing pump from its piping.
Seal housing
Large, self-cleaning seal housing tranports particles outwards along the conical-shaped chamber to the relief piping, then back from sealing chamber to suction side to ensure seal longevity.
Sensor interfaces
Two standard pressure sensors, one at suction and one at discharge nozzle, measure inlet and outlet pressure, while optional sensors, one for horizontal, one for vertical, at the bearing frame can measure vibrations and bearing temperature. The sensors can be connected to any intellient plant monitoring and diagnostic system to monitor the pump's performance.
Parameters of Multistage Centrifugal Process Pump
| Flow Capacity | 185-335m3/h | Delivery Head | 76-423 m |
| Inlet/Outlet Dia. | DN200/DN200 mm | Working Pressure | ≤ 6.345 MPa |
| Liquid Temperature | 0 - 80 ℃ | Driven By | Electric Motor / Diesel Engine |
| Seal Type | Mechanical seal / Gland packing | Liquid | Water or similar |
| Material of Construction | Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205 |
Main Parts Configuration
The centrifugal process pump could be applied to transfer different kinds of liquid by customized wet parts, here followed our recommendation of main configuration:
| Parts Name | Clean Water | Sewage | Hot Water | Corrosive Liquid | Oil Liquid |
| Pump Body | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Shaft | Cast Iron | S.S420 | S.S420/42CrMo | S.S630 | S.S420/40Cr |
| Shaft Sleeve | Carbon Steel | S.S420 | S.S304 | S.S316/S.S630/S.S2205 | S.S304/S.S316 |
| Impeller | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Wearing Ring | Cast Iron | Ductile Iron | Cast Steel/S.S304 | S.S304/S.S316/S.S2205 | S.S304/S.S316 |
| Bearing | China Make/NSK/SKF/Customized |
| Seals | Mechanical Seals/Gland Packing Seals |
Product Tags:
|
|
335m3/H Oil Centrifugal Pump Horizontal Centrifugal Sewage Pump DN250mm Images
|
